/525.743/PCB - Repository - Main - Redmine

root/525.743/PCB @ 77f1c73c

Name	Size
Project Outputs for 525-743_daughtercard
passives
525-743_daughtercard.PrjPcb	47.2 KB
525-743_daughtercard.PrjPcbStructure	54 Bytes
Daves_Library.PcbLib	493 KB
Daves_Library.SchLib	20.5 KB
daughtercard.PcbDoc	712 KB
daughtercard.SchDoc	131 KB
schematic.pdf	49.5 KB

#	Date	Author	Comment
190804d5	05/05/2013 08:17 PM	dsorber	Started working on final project documentation.
04e25279	03/21/2013 09:02 PM	dsorber	Somehow I designed the PCB using a different pushbutton switch than I included in the BOM. Fixing the BOM and adding the correct datasheet/drawing.
0783049a	03/16/2013 02:18 PM	dsorber	Fixing a few minor issues Andy noticed with my layout after I'd sent it out to fabrication (of course). These changes will be revision B of the board.
0f4a14b5	03/14/2013 11:43 PM	dsorber	Did a final review and then created gerber files for fabrication.
53bd6ff8	03/14/2013 02:14 AM	dsorber	Good thing I did a final design check... it turns out that I had my pads misnumbered for both ICs. It took me a couple of hours to fix it but I think it's okay now.
72edc545	03/12/2013 01:54 PM	dsorber	Made the reference designators a bit smaller and made some square pads to designate pin 1's.
8a86f755	03/12/2013 11:33 AM	dsorber	Made a few more minor tweaks to the layout. I also moved the LED labels to the silkscreen layer (whoops).
bf56c619	03/11/2013 08:33 PM	dsorber	Made a few tweaks to the layout including adding a board name and revision to the silk screen.
8b7ff847	03/11/2013 12:37 PM	dsorber	Made a couple of modifications based on Andy's feedback.
dc972317	03/10/2013 08:04 PM	dsorber	Finished routing the board! Tomorrow Andy will tell me I did it all wrong...

Also available in: Atom