Project

General

Profile

Statistics
| Branch: | Tag: | Revision:

root/525.743/PCB @ ba1e6b20

# Date Author Comment
190804d5 05/05/2013 08:17 PM dsorber

Started working on final project documentation.
04e25279 03/21/2013 09:02 PM dsorber

Somehow I designed the PCB using a different pushbutton switch than I included in the BOM. Fixing the BOM and adding the correct datasheet/drawing.
0783049a 03/16/2013 02:18 PM dsorber

Fixing a few minor issues Andy noticed with my layout after I'd sent it out to fabrication (of course). These changes will be revision B of the board.
0f4a14b5 03/14/2013 11:43 PM dsorber

Did a final review and then created gerber files for fabrication.
53bd6ff8 03/14/2013 02:14 AM dsorber

Good thing I did a final design check... it turns out that I had my pads misnumbered for both ICs. It took me a couple of hours to fix it but I think it's okay now.
72edc545 03/12/2013 01:54 PM dsorber

Made the reference designators a bit smaller and made some square pads to designate pin 1's.
8a86f755 03/12/2013 11:33 AM dsorber

Made a few more minor tweaks to the layout. I also moved the LED labels to the silkscreen layer (whoops).
bf56c619 03/11/2013 08:33 PM dsorber

Made a few tweaks to the layout including adding a board name and revision to the silk screen.
8b7ff847 03/11/2013 12:37 PM dsorber

Made a couple of modifications based on Andy's feedback.
dc972317 03/10/2013 08:04 PM dsorber

Finished routing the board! Tomorrow Andy will tell me I did it all wrong...
dd4d4844 03/09/2013 05:28 PM dsorber

Prerouting failsafe commit.
2607c262 03/09/2013 04:02 AM dsorber

Made a few more corrections to the schematic and then started working on the actual PCB layout. The PCB will be approximately 2 inches by 3 inches.
a993b699 03/08/2013 02:50 AM dsorber

Forgot to create PDF of lastest schematic.
1f08bcbd 03/08/2013 02:46 AM dsorber

Finished up schematic and started working on PCB. Then had to go back and fix schematic :( . Finally ran out of steam...
feea6b2c 03/07/2013 01:59 AM dsorber

Finished up the first complete draft of the schematic.
035b6525 03/05/2013 03:05 AM dsorber

Reworked a couple of the schematic symbols. Also redrew parts of the schematic after getting feedback from Andy.
1eebfe60 03/04/2013 01:55 AM dsorber

Started working on the schematic. More work needed...
de2a420c 03/02/2013 10:43 PM dsorber

Finished creating footprints and schematic symbols for all components. Also adding the DD_Passives library for passive components from work. I'm not sure if the library includes footprints, but at least it has all the schematic symbols.
8db18edd 03/01/2013 03:22 AM dsorber

Continuing to create component footprints and schematic symbols. I also added the headers I'm going to use to the BOM.
f976417b 02/28/2013 01:57 AM dsorber

Created footprint and schematic symbols for TMP512 and SAA1064T parts. Also created a schematic page for the daughtercard.
1694551f 02/27/2013 03:16 AM dsorber

Finally got Altium up and running in my VM. I started working on drawing the pads for the TMP512 chip. I still need to figure out how to create a schematic symbol and then link the two.